Home designing is a sensitive and intricate task that has to be done with precision and careful contemplation. Missing out on even a single minute aspect can result in failure of the whole project or an improperly built structure. There are certain mistakes that professionals need to avoid at all costs while planning a residential structure. The major ones have been explained below in detail:
Failing To Orientate Living Spaces Towards North
This is perhaps the most common error made while designing homes, which can result in uneven distribution of heat throughout the house. This, in turn, may cause the living spaces to become too hot in summer and too cool during winter. Living spaces and bedrooms of any house should always face towards the north/east side for allowing sunlight to pour into every room ideally.
Some professionals just do not perform enough research prior to developing the blueprint of a residence, which leads to high construction costs and site constraints. It is very important to know if a site is bushfire prone, has geotechnical issues, is uncommonly zoned, is flat and so on. Being aware of these things is extremely vital before drafting the house plan.
Very Open Plan
House plans that are extremely open can later on cause irreversible acoustical and privacy problems. This is because a spacious and internally open area having hard floors and flat walls hikes up internal reverberation of literally any noise originating either outside or inside the house. Therefore, plans that are too open should always be avoided.
Making Rooms Too Spacious
People often tend to include too much space in wrong regions of the house. Be it 3 or 4 bedroom house designs, each area should be allocated only as much space as is necessary. One way to avoid this mistake is by turning some of the rooms into multifunctional zones.
Unsuitable External Finishes
This is yet another mistake that professionals can make by rushing with final paint colours and finishes, after the fundamentals of the construction part have been decided. Choosing the right external finishes is essential because they greatly influence the aesthetic appeal of a house. As such, one must invest a certain amount of time in the task of picking suitable finishes for the outer portion of a home.
In order to ensure successful completion of a residential structure, these design mistakes must be eliminated carefully right from the start.